Case Packers

Product Details:

Additional Information:

• Item Code: ACE-TPG

Product Details:

• Innovative design to handle products that are not suitable to vacuum pick but to be top loaded.
• Monoblock case erector, product filing and taping system.
• Positive flap locating system for product loading with ease inside the carton.
• Options of servo and pneumatic configurations for step by step stacking
• Relatively higher speed achieved in comparison with the pick and place mechanism.
• Fully automatic carton erection loading and flap closing system.

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• The case erecting and taping machine automatically erect carton and does bottom taping
• The carton/CLD bundles need to be placed on a width adjustable magazine
• Cartons are erected automatically through suction cups and flaps are closed
• Specially designed intermittent motion chain drive picks up the carton for taping
• The machine is suitably designed to accommodate a range of carton sizes
• The machine is sturdily constructed and it is fully covered with powder coated MS
• Pneumatic components are of FESTO / SMC make
• PLC : OMRON

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• The case erecting machine automatically erects the carton and moves to taping section
• CLD/carton bundles to be stacked on an adjustable magazine for auto erection
• Mega Cartons are erected and bottom flap closed and position at filling station
• Specially designed intermittent motion chain drive picks up the carton for taping
• The machine is suitably designed to accommodate a range of carton sizes
• Bottom and taping are done by closing minor and major flaps automatically
• Sturdy base frame with side covers and safety covers on top of the machine
• Machine matches to GMP standards and necessary IQ/OQ/DQ certificates are provided

Additional Information:

• Delivery Time: 6 weeks

Product Details:

Additional Information:

• Item Code: ACEPT-STK-BTL

Product Details:

Additional Information:

• Item Code: ACP-PPS-Series

Product Details:

• The Auto Tape Sealing Machine Is Used in End of Line Automation
• Flaps Are Closed Automatically Adjusting to the Carton Size
• Side Gripping Belts Take Up the Cartons to Top and Bottom Sealing Stations
• BOPP Tape Rolls Fitted on the Taping Heads Tape the Cartons
• PLC Based Machine / Pneumatic Closing System
• Drive : 1 Hp Geared Motor
• Base Frame MS Powder Coated and Suitably Covered with Safety Covers

Additional Information:

• Item Code: ACT-FLPC-M

Product Details:

• The machine automatically ejects the carton from the bundle loaded to its magazine.
• Bottom flaps are automatically closed and fed to the bottom taping station speed up to 12 cartons per minute.
• Easy change over for different carton sizes
• According to customer required matrix size, product will be packed inside a carton box with suitable mechanism (Top load, Side Load and staking and droping)
  
  
  

Additional Information:

• Item Code: TRY-STR

Product Details:

Product Details:

• Case De packer is used to offload bottles from cartons and places on conveyor
• The machine works on the principle of top load pick and place mechanism
• Carton with empty bottles are fed to the case packer with flap opened condition
• Carton / CLD is erected manually and fed for decasing operation
• Pick up head comprise of vacuum suction heads to hold up the bottles – change part
• Bottle locators are suitably designed and fitted to the pick up head – a change part
• The machine is made of sturdy powder coated SS base and SS 304 contact parts
• Single pick up head – single lane Infeed Model. pneumatics : FESTO /SMC make
• Vacuum pick up plate is a change part depending upon the CLD size
• Allen bradley PLC withcsafety covers – safety light curtain is optional extra
• Out feed conveyor belt is covered in customer scope or optional extra
• Speed of the machine : up to 10 pick up x size of the matrix of one layer

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• Auto case packer – ACP-PPD-SL is an user friendly cost effective model
• The machine works on the principle of top load pick and place mechanism
• Product from the packing machine end of line is fed in to the case packer
• Based on the matrix size, infeed pusher forms one layer in matrix table
• Carton / CLD is erected manually and bottom flap closed and set for filling
• Once matrix of one layer is completed, vacuum pick up plate picks up the layer
• Product matrix is filled inside the CLD layer by layer till top most
• Upon completion of the top most layer the CLD is ejected out for the main line
• The machine is made of sturdy powder coated ms base and SS 304 contact parts
• Double pick up head – single lane infeed model. Pneumatics : FESTO /SMC make
• Vacuum pick up plate is a change part depending upon the CLD size
• ALLEN BRADLEY PLC with safety covers – safety light curtain is optional extra
• Infeed conveyor belt is covered in customer scope or optional extra
• Speed of the machine : up to 12 pickup x size of the matrix of one layer
• The machine takes up the in feed from single packing machine

Product Details:

• The machine automatically erects the CLD from the bundle and packs the product
• Hi speed model to pack up to a speed of 500 units per minute in side load format
• Product from the final packing line is stacked vertically by high speed lifting system
• Based on completion of a layer, fed in to the carton through side load system
• Carton is auto erected from the adjustable magazine and kept ready with loactors
• After completion of both the layers, the carton is pushed to folding taping line
• Both the side of the carton is auto taped by the taping machine

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• The machine automatically erects the CLD from the bundle and packs the product
• Product from the final packing line is stacked vertically as per the matrix size
• Based on completion of a layer, it is pushed inside the carton through side load
• After completion of both the layers, the Carton is pushed to folding taping line
• Both the side of the carton is auto taped by the taping machine.

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• Automatic side load model case packer integrated with carton erection assembly
• The jumbo model is suitably designed to pack relatively bigger size master cartons
• Product from the final packing line is stacked vertically as per the matrix size
• Based on completion of a layer, it is pushed inside the carton through side load
• After completion of both the layers, the carton is pushed to folding taping line
• Both the side flaps are closed and taped on both the sides and ejected out
• The machine is made of sturdy MS powder coated base and SS contact parts
• Safety covers are provided with the machine/safety light curtain  optional extra
• Infeed conveyor belt is covered in customer scope or at our scope at extra cost
• Speed of the machine depends upon the matrix size max. upto 180 units/min
• Single lift up  single lane infeed model. pneumatics : FESTO /SMC make
• Basic machine is supplied with one set and change over parts as applicable extra
• Power : 2 Hp air requirement : 25 CFM at 6 bar  FAD  dried compressed air
• Easily adjustable size change overs with lesser change parts requirement
• HMI based fault indication displays

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• Auto case erection and side load system.
• Inline matrix formation through vertical stacking
• Inline automatic major and minor flaps closing
• Integrated dual side taping system is done or Gluing system can be placed.
• Flexibility for easy topping up of carton bundles
• Higher flexibility to handle wide varieties of carton and products
• Capable to link up in high speed lines
• Easy to glue and easy to close the flaps
• Lower operating cost comparing to pick and place model.

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• The machine works on the principle of pick and place method using specially designed vacuum suction systems.
• Cycle Speed : Pneumatically operated : 12 cycles / head and Servo Driven : 15 cycles / head.
• Matrix Plate : Matches to the carton size, matrix and product size fitted with rectangular bellow suction cups or round below suction cups depending upon the product shape.
• PLC : Allen Bradley make with HMI panel optional extra & pneumatic components are of FESTO / SMC make.
• The machine houses the electrical and pneumatic panel within the base foot print of the machine.
• Grippers are used to hold containers and bottles if they are not suitable for lifting through vacuum.
• All moving parts are covered with safety limit switch interlock and the machine is fitted with optional beam sensors (Light curtains) to ensure operator safety.
• HMI will display trouble shooting procedures and fault indications to minimize down time and improve OEE. Coverall equipment efficiency.
• Electrical and pneumatic components are designed for easy access and replacement without disturbing main wiring system to reduce down time.

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• The machine is a mono block carton erection with pick and place top load filling
• CLD/carton bundles to be stacked on an adjustable magazine driven positively
• Cartons will be erected and presented to filling station along with flap locators
• This is a single lane infeed model with single head pick and place mechanism
• Product from end of line is arranged to the matrix size in the matrix table
• Matrix layers are picked and placed inside the carton in sequence till top layer
• The cycle repeats till the cld is filled with top layer and ejected on completion
• Bottom and top taping are done by closing minor and major flaps automatically
• Foor print : 2700 mm x 1650 mm / effective repeat cycles : Upto 20
• ms base frame and safety covers with polycarbonate and limit switch interlock
• PLC : Allen bradley make with HMI support with fault indication system
• Festo/SMC pneumatics / air consumption 45 CFM @ 6 bar pr / power : 3 KW
• Speed depends upon the matrix combination ( effective cycles x matrix size )
• Infeed conveyor is with customer scope or supplied by us at additional cost.
• Safety light curtains (beam sensors) are not a part of the scope which is optional

Product Details:

• The machine is a mono block carton erection with pick and place top load filling
• CLD/carton bundles to be stacked on an adjustable magazine driven positively
• Cartons will be erected and presented to filling station along with flap locators
• This is a single lane infeed model with single head pick and place mechanism
• Product from end of line is arranged to the matrix size in the matrix table
• Matrix layers are picked and placed inside the carton in sequence till top layer
• The cycle repeats till the cld is filled with top layer and ejected on completion
• Bottom and top taping are done by closing minor and major flaps automatically
• Foor print : 2700 mm x 1650 mm / effective repeat cycles : Upto 20
• ms base frame and safety covers with polycarbonate and limit switch interlock
• PLC : Allen bradley make with HMI support with fault indication system
• Festo/SMC pneumatics / air consumption 45 CFM @ 6 bar pr / power : 3 KW
• Speed depends upon the matrix combination ( effective cycles x matrix size )
• Infeed conveyor is with customer scope or supplied by us at additional cost.
• Safety light curtains (beam sensors) are not a part of the scope which is optional

Additional Information:

• Delivery Time: 6weeks

Product Details:

• The machine is a triple head triple lane infeed with pick and place top load model
• CLD/carton bundles to be opened externally and presented for filling
• Product from end of line is arranged to the matrix size in the triple matrix table
• Matrix layers are picked and placed inside the cld in alternative cycle sequentially
• The cycle repeats till the cartons are filled with top layer and ejected automatically
• Taping needs to be done externally in end of line or supplied at extra cost
• Approx size of the machine : 4300 mm x 1650 mm /effective repeat cycles : Upto 30
• SS base frame and safety covers of 8mm thick polycarbonate with height pads
• PLC : Allen bradley make with HMI support with fault indication system
• Speed depends upon the matrix combination ( effective cycles x matrix size )
• Infeed conveyor to the case packer will be at customer scope or at additional cost
• Light curtains (beam sensors) are not covered in the scope. cost extra if required
• The machine is compatible to pack both bundled soap and individual soap
• Change parts cost is extra as applicable. one size part given with basic machine
• The case erecting and taping machine automatically erect carton and does bottom taping
• The carton/CLD bundles need to be placed on a width adjustable magazine
• Cartons are erected automatically through suction cups and flaps are closed
• Specially designed intermittent motion chain drive picks up the carton for taping/li>
• The machine is suitably designed to accommodate a range of carton sizes
• The machine is sturdily constructed and it is fully covered with ss 304 sheets
• Machine matches to GMP standards and necessary IQ/OQ/DQ certificates are provided
• Pneumatic components are of Festo / SMC make
• PLC : Allen bradley make

Additional Information:

• Delivery Time: 6 weeks

Product Details:

• The machine is a Four Headdouble lane infeed with pick and place top load model
• CLD/carton bundles to be opened externally and presented for filling
• Product from end of line is arranged to the matrix size in the four matrix table
• Matrix layers are picked and placed inside the cld in alternative cycle sequentially
• The cycle repeats till the cartons are filled with top layer and ejected automatically
• Taping needs to be done externally in end of line or supplied at extra cost
• Approx size of the machine : 4300 mm x 1650 mm /effective repeat cycles : Upto 30
• SS base frame and safety covers of 8mm thick polycarbonate with height pads
• PLC : Allen bradley make with HMI support with fault indication system
• Speed depends upon the matrix combination ( effective cycles x matrix size )
• Infeed conveyor to the case packer will be at customer scope or at additional cost
• Light curtains (beam sensors) are not covered in the scope. cost extra if required
• The machine is compatible to pack both bundled soap and individual soap
• Change parts cost is extra as applicable. one size part given with basic machine
• The case erecting and taping machine automatically erect carton and does bottom taping
• The carton/CLD bundles need to be placed on a width adjustable magazine
• Cartons are erected automatically through suction cups and flaps are closed
• Specially designed intermittent motion chain drive picks up the carton for taping
• The machine is suitably designed to accommodate a range of carton sizes
• The machine is sturdily constructed and it is fully covered with ss 304 sheets
• Machine matches to GMP standards and necessary IQ/OQ/DQ certificates are provided
• Pneumatic components are of Festo / SMC make
• PLC : Allen bradley make

Additional Information:

• Delivery Time: 6weeks

Product Details:

• The machine is a monoblock carton erection with stacking model top load filling
• CLD/Carton bundles to be stacked on an adjustable magazine driven positively
• Cartons will be erected and presented to filling station along with flap locators
• Product from end of line is arranged to the matrix size in the matrix table
• The matrix is pushed to the specially designed receiving plate inside the table
• The cycle repeats till the CLD is filled with top layer and ejected on completion
• Bottom and top taping are done by closing minor and major flaps automatically
• Sturdy base frame and safety covers with polycarbonate and limit switch interlock
• PLC : allen bradley make with HMI support with fault indication system
• FESTO/SMC pneumatics / air consumption 20 CFM @ 6 Bar Pr / power : 3 KW
• Speed depends upon the matrix combination ( effective cycles x matrix size )
• Infeed conveyor is with customer scope or supplied by us at additional cost.
• Safety light curtains (Beam Sensors ) is not a part of the scope which is optional.
• The machine is versatile and suitable to pack pouches, bottles also

Additional Information:

• Delivery Time: 6 weeks